Product Description
Exam Number/Code: 920-332
Exam name: Mommunication Server 1000 Ris.5.0 Install & Commissioning
920-332 test is the important of Nortel certifaction. Only you pass the 920-332 exam you could have the chance to get Nortel certifaction. To help examinee, Exambible publish the Questions and Answers about 920-332 exam. And the 96 simulation exam are all designed by expert from Exambible. Examinees could have an enough prepare by these simulation exercises and pass the 920-332 test successfully.
Exambible also provide free 920-332 Demo, examinees can download and use before buying 920-332 Q&As, then decide if they need to purchase.
More Nortel NCSS Resources
Recommended Nortel exams
- Nortel 920-447 exam: nncse-contact center exam
- Nortel 920-259 exam: Nortel WLAN 2300 Rls.6.0 Implementation & Management
- Nortel 920-215 exam: nncss-passport 7000/15000 exam
- Nortel 920-807 exam: Nortel Unified Communications Solutions
- Nortel 920-127 exam: NNCSS Succession BCM 3.0 Exam
- Nortel 920-260 exam: Nortel Secure Router Rls.10.1 Configuration & Management
- Nortel 920-163 exam: NCSS-Contact Center Manager RIs.6.0 Technical Support Exam
- Nortel 920-158 exam: ncds-callpilot4.0 system administrator exam
- Nortel 920-457 exam: CallPilot Ris.4.0 Unified Messaging Exam
- Nortel 920-453 exam: ncse callpilot 2.x/3.0 unified messaging
- Nortel 920-162 exam: callpilot 4.0 installation and maintenance exam
- Nortel 920-249 exam: Nortel Application Switch Ris.23XConfig &Admin
Nortel NCSS 920-332 Web Demo
This webdemo is just a demo data, only for reference and learning, there is no other purposes.
1. A customer has a Communication Server (CS) 1000E system with a cost
optimized gateway controller and DSP daughterboards that support 96 VoIP
voice gateway resources. The CS 1000E supports CeMux PSTN access cards
in the Media Gateway 1000E, reducing the overall cost and complexity of
the system. Based on these requirements, which is the recommended Rls.
5.0 hardware for the customer?
A. CP-PM Call Server and MGC with High-Density DSP Daughterboard
B. CP-PM Call Server, MGC without DSP Daughterboards, and MC 32S
C. CP-PIV Call Server, MGC without DSP Daughterboards, and MC 32S
D. CP-PM Call Server and Media Gateway Controller (MGC) with Low-Density
DSP Daughterboard
Answer: A
2.A customer has imported the node files from the Signaling Server to
the Call Server in Element Manager. The customer sends the node
configuration files to all IP Telephony components in the node using the
Transfer/Status button. The Transfer/Status button on the
Transfer/Status web page is yellow. What does this indicate?
A. The transfer status of the node is in progress.
B. The node configuration is transferred to the elements.
C. The transfer status of the node elements is unavailable.
D. An element within the node failed to transfer the BOOTP or CONFIG
files.
Answer: C
3. A customer has deployed a Communication Server (CS) 1000E network
with a primary and a secondary site. In the event the primary system
fails, the customer requires the user database to be replicated from the
primary site to the secondary site. Which Geographic Redundancy
configuration meets the customers needs?
A. CPP Redundancy
B. Campus Redundancy
C. Controlled Load-sharing
D. Survivable Media Gateway
Answer: D
4. A customer is planning to install a CP-PM Signaling Server into their
Communication Server (CS) 1000 Rls. 5.0 Communication Server 1000E
system. Which two hardware components or combinations does the customer
need to identify in order to distinguish the CP-PM card as a Signaling
Server? (Choose two.)
A. Switch 5 set to Position 1
B. Switch 5 set to Position 2
C. two Compact Flash Drives (one RMD and one FMD)
D. one Compact Flash Drive (RMD) and One Hard Drive (FMD)
Answer: BD
5. A customer has a Communication Server (CS) 1000E system with a cost
optimized gateway controller and DSP daughterboards that support 160
VoIP voice gateway resources. The CS 1000E supports CeMux PSTN access
cards in the Media Gateway 1000E, reducing the overall cost and
complexity of the system. Based on these requirements, which is the
recommended Rls. 0 hardware for the customer?
A. CP-PM Call Server, MGC with High-Density Daughterboard, and MC 32S
B. CP-PM Call Server and MGC with Low-Density and High-Density DSP
Daughterboards
C. CP-PM Call Server, MGC with Low and High-Density DSP Daughterboards,
and MC 32S
D. CP-PM Call Server and Media Gateway Controller (MGC) with Low-Density
DSP Daughterboard
Answer: C
6. A customer has deployed a Communication Server (CS) 1000E network
with a primary and a secondary site. In the event that the primary
system fails, the customer requires each system backs up the IP
telephones on the other system. The customer has been told this is
possible and will require duplicate IP Phone Licenses on the second
system. Which Redundant configuration is required?
A. 1 + 1 configuration
B. Campus Redundancy
C. Controlled Load-sharing
D. Survivable Media Gateway
Answer: C
7. A customer has installed the system components of a Communication
Server (CS) 1000E system and has powered-upthe system. Which visual
indicator helps the customer differentiate whether a CP-PM card is
running as a Call Server or a Signaling Server?
A. Main Status LED
B. FMD/HD Status LED
C. Call Server Redundancy LED
D. Embedded LAN (ELAN) Connection Status Link LED
Answer: C
8. A customer is planning system requirements for their Communication
Server (CS) 1000E High Availability (HA) system. Based on system
capabilities and system capacities with Rls. 5.0, which is the maximum
number of Media Gateway 1000E systems supported?
A. 5
B. 20
C. 30
D. 50
Answer: D
