Product Description
Exam Number/Code: 920-127
Exam name: NNCSS Succession BCM 3.0 Exam
920-127 test is the important of Nortel certifaction. Only you pass the 920-127 exam you could have the chance to get Nortel certifaction. To help examinee, Exambible publish the Questions and Answers about 920-127 exam. And the 66 simulation exam are all designed by expert from Exambible. Examinees could have an enough prepare by these simulation exercises and pass the 920-127 test successfully.
Exambible also provide free 920-127 Demo, examinees can download and use before buying 920-127 Q&As, then decide if they need to purchase.
More Nortel NCSS Resources
Recommended Nortel exams
- Nortel 920-344 exam: BCM50/450 Rls. 5.0 Sales Engineering
- Nortel 922-071 exam: BCM50 Rls.3.0 & BCM200/400 Rls.4.0 Config & Maintenance
- Nortel 920-352 exam: BCS 3000 Rls.1.0 Storage Networking Engineering
- Nortel 922-031 exam: Carrier VoIP Capacity Planning and Performance Monitoring
- Nortel 920-363 exam: Communication Server 1000 Rls 6.0 Installation & Management
- Nortel 922-091 exam: Enterprise VoIP and Multimedia Applications Engineering
- Nortel 922-080 exam: CallPilot Rls.5.0 Upgrades & System Troubleshooting
- Nortel 920-505 exam: Optical Metro 3500 Operations and Maintenance
- Nortel 920-441 exam: nncde contivity security exam
- Nortel 922-095 exam: Communication Server 1000E Rls.5.0 Install & Commisioning
- Nortel 920-111 exam: NCSS-VoIP Communication Server(CS)2100
- Nortel 920-107 exam: NNCSS-Periphonics MPS 100 Installation and Maintenance
Nortel NCSS 920-127 Web Demo
This webdemo is just a demo data, only for reference and learning, there is no other purposes.
1. A customer has a 4X16 MBM installed on their BCM 3.0. Which
configuration is possible with this hardware?
A. four analog lines & 16 TCMs
B. a total of four H.323 trunks & 16 TCMs
C. four emergency telephones & 16 TCMs
D. a maximum of four ISDN lines & 16 TCMs
Answer: A
2.Your customer has three workstations with PC's but no wired sets and
requires communication access. What solution can you offer the customer?
A. Install an ASM
B. Install a I2050
C. Add VoIP trunks
D. Program a I2004
Answer: B
3. With BCM 3.0, digital station capacity is increased by using new
DSMs. What capability allows the new DSMs to achieve this increase?
A. new DSMs allow connection to more DS-30 resources
B. new DSMs allow access to B2 channels of DS-30 resources
C. new DSMs allow access to the D channel of DS-30 resources
D. new DSMs allow connection to the LAP-D channel of DS-30 resources
Answer: A
4. You are converting a Norstar system to a BCM 0. The customer has
existing analog E&M trunks. How can you make these trunks work on
the new system?
A. Install a DTM
B. Add keycodes
C. Program them on a FEM
D. Configure them on a BRI module
Answer: C
5. A BCM 2.5 customer is running an application with one DSM 32+ module
with 32 digital sets on two DS-30 resources and is using all remaining
DS-30 resources for trunking. If the customer upgrades to BCM 3.0, how
many digital sets can be supported?
A. 32
B. 48
C. 64
D. 80
Answer: C
6. Your customer requires 2 CAP modules for their attendant set. What
equipment do you require to make these CAPs work?
A. A M7316 with one SAP
B. A M7324 with one SAP
C. A M7324 with two SAPs
D. A M7310 with two TCM connections
Answer: B
7. You need to install 30 IP sets on a BCM 3.0. What action must you
perform first to enable these sets?
A. You need to add keycodes.
B. You need to program H.323 trunks.
C. You must connect the IP sets to the MSC.
D. You need to boot the BCM 3.0 with 30 IP sets connected.
Answer: A
8. You are installing a BCM 3.0 with 16 IP trunks, 32 IP sets and 64 T
series sets. What action is required to make this operational?
A. Add Networking VPIM keycodes.
B. Program 32 IP sets and 64 analog sets.
C. Set the DS30 split to 3/5 and install DSM32s.
D. Set the DS30 split to 3/5 and install a DSM16.
Answer: C
