Worldwide:
Change

640-816, Cisco CCNA 640-816 Exam

Home >> Cisco >> CCNA >> 640-816

640-816 Exam

Cisco 640-816 exam
  • Questions and Answers
  • 233 Q&As
  • Update time
  • March 12th,2010
  • Software Price
  • $114 $79
  • Special Prices
  • $48

loading loading

↓ download pdf demo

+ add to wishlist

Product Description

Exam Number/Code: 640-816

Exam name: Interconnecting Cisco Networking Devices Part 2

640-816 test is the important of Cisco certifaction. Only you pass the 640-816 exam you could have the chance to get Cisco certifaction. To help examinee, Exambible publish the Questions and Answers about 640-816 exam. And the 233 simulation exam are all designed by expert from Exambible. Examinees could have an enough prepare by these simulation exercises and pass the 640-816 test successfully.
Exambible also provide free 640-816 Demo, examinees can download and use before buying 640-816 Q&As, then decide if they need to purchase.

More Cisco CCNA Resources

Recommended Cisco exams

  • Cisco 642-587 exam: Advanced Wireless LAN for Field Engineers
  • Cisco 640-460 exam: IIUC Implementing Cisco IOS Unified Communications (IIUC)
  • Cisco 642-564 exam: Security Solutions for Systems Engineers(SSSE)
  • Cisco 642-533 exam: Implementing Cisco Intrusion Prevention System (IPS)
  • Cisco 646-671 exam: Cisco Advanced Wireless LAN Sales Specialist
  • Cisco 640-801 exam: Cisco Certified Network Associate (CCNA)
  • Cisco 646-589 exam: Cisco Lifecycle Services Advanced Wireless(LCSAWLAN)
  • Cisco 642-291 exam: Network Management Network Management
  • Cisco 646-057 exam: Access Routing and LAN Switching Routing and Switching AM Exam
  • Cisco 644-141 exam: IP Communications CallManager Express Exam (CME)
  • Cisco 642-105 exam: Implementing Cisco Unified Messaging
  • Cisco 642-532 exam: Securing Networks Using Intrusion Prevention Systems Exam (IPS)

Cisco CCNA 640-816 Web Demo

This webdemo is just a demo data, only for reference and learning, there is no other purposes.

1. Refer to the exhibit. What can be concluded from the output of the debug command?
A. The output represents normal OSPF operation.
B. The interfaces of two OSPF routers connected to the Border router are in the same subnet.
C. The OSPF router connected to interface Serial0/1 has NOT formed a neighbor relationship with the Border router.
D. A router is connected to interface Serial0/3 of the Border router. The OSPF router ID of the connected router is the IP address of the connected interface.
Answer: C


2.What is the default Local Management Interface frame type transmitted by a Cisco router on a Frame Relay circuit?
A. Q933a
B. B8ZS
C. IETF
D. Cisco
E. ANSI
Answer: D

3. Refer to the output from the show running-config command in the exhibit. What should the administrator do to allow the workstations connected to the FastEthernet 0/0 interface to obtain an IP address?
A. Apply access-group 14 to interface FastEthernet 0/0.
B. Add access-list 14 permit any any to the access list configuration.
C. Configure the IP address of the FastEtherent 0/0 interface to 10.90.201.1.
D. Add an interface description to the FastEthernet 0/0 interface configuration.
Answer: C

4. Refer to the exhibit. Two routers have just been configured by a new technician. All interfaces are up. However, the routers are not sharing their routing tables. What is the problem?
A. Split horizon is preventing Router2 from receiving routing information from Router1.
B. Router1 is configured for RIP version 2, and Router2 is configured for RIP version 1.
C. Router1 has an ACL that is blocking RIP version 2.
D. There is a physical connectivity problem between Router1 and Router2.
E. Router1 is using authentication and Router2 is not.
Answer: B

5. Refer to the exhibit. The router has been configured with these commands:
hostname Gateway
interface FastEthernet 0/0
ip address 198.133.219.14 255.255.255.248
no shutdown
interface FastEthernet 0/1
ip address 192.168.10.254 255.255.255.0
no shutdown
interface Serial 0/0
ip address 64.100.0.2 255.255.255.252
no shutdown
ip route 0.0.0.0 0.0.0.0 64.100.0.1
What are the two results of this configuration? (Choose two.)
A. The default route should have a next hop address of 64.100.0.3.
B. Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.
C. The address of the subnet segment with the WWW server will support seven more servers.
D. The addressing scheme allows users on the Internet to access the WWW server.
E. Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.
Answer: DE

6. Refer to the exhibit. Which statement describes DLCI 17?
A. DLCI 17 describes the ISDN circuit between R2 and R3.
B. DLCI 17 describes a PVC on R2. It cannot be used on R3 or R1.
C. DLCI 17 is the Layer 2 address used by R2 to describe a PVC to R3.
D. DLCI 17 describes the dial-up circuit from R2 and R3 to the service provider.
Answer: C

7. Refer to the exhibit. The network shown in the exhibit has just been installed. Host B can access the Internet, but it is unable to ping host C. What is the problem with this configuration?
A. Host B should be in VLAN 13.
B. The address of host C is incorrect.
C. The gateway for host B is in a different subnet than the host is on.
D. The switch port that sends VLAN 13 frames from the switch to the router is shut down.
E. The switch port connected to the router is incorrectly configured as an access port.
Answer: B

8. Refer to the exhibit.
A junior network engineer has prepared the exhibited configuration file. What two statements are true of the planned configuration for interface fa0/1? (Choose two.)
A. The two FastEthernet interfaces will require NAT configured on two outside serial interfaces.
B. Address translation on fa0/1 is not required for DMZ Devices to access the Internet.
C. The fa0/1 IP address overlaps with the space used by s0/0.
D. The fa0/1 IP address is invalid for the IP subnet on which it resides.
E. Internet hosts may not initiate connections to DMZ Devices through the configuration that is shown.
Answer: BE


Cisco 640-816

Exambible is designed production, finishing, international IT Cisco certification examination papers and related learning materials website, we are committed to doing the best and most practical 640-816 questions.Although this exam regardless of difficulty. But as long as the correct methods of learning coupled with Exambible's 640-816 study materials.You will be able to pass the exam easily with high score.

Many exam candidates have purchased 640-816 exam, which is very useful. It has helped many students pass their certification.Service first! We believe that in order to succeed in today's era, we must provide customers with a full range of thoughtful and careful full-quality after-sales service, and only customer satisfaction, we can develop.

Exambible's 640-816 exam was updated fastest and the most accurate one I bought.They not only provide Cisco aspects of exam questions and answers,they also have Cisco,IBM,Oracl and so on and each was fast and accurate.Question Dumps exam is always updated to provide you the most actual information available

Our examination questions have some special channel,so we have a better understanding of your examination and what is required the candidates most wanted.All ExamBible exam products are backed with 100 percent money back guarantee, if you could not pass your certification 640-816 exam in your first attempt.

Web Demo:
1.What is the default Local Management Interface frame type transmitted by a Cisco router on a Frame Relay circuit?
A. Q933a
B. B8ZS
C. IETF
D. Cisco
E. ANSI
Answer: D


2. Refer to the exhibit. What can be concluded from the output of the debug command?
A. The output represents normal OSPF operation.
B. The interfaces of two OSPF routers connected to the Border router are in the same subnet.
C. The OSPF router connected to interface Serial0/1 has NOT formed a neighbor relationship with the Border router.
D. A router is connected to interface Serial0/3 of the Border router. The OSPF router ID of the connected router is the IP address of the connected interface.
Answer: C


3.Refer to the output from the show running-config command in the exhibit. What should the administrator do to allow the workstations connected to the FastEthernet 0/0 interface to obtain an IP address?
A. Apply access-group 14 to interface FastEthernet 0/0.
B. Add access-list 14 permit any any to the access list configuration.
C. Configure the IP address of the FastEtherent 0/0 interface to 10.90.201.1.
D. Add an interface description to the FastEthernet 0/0 interface configuration.
Answer: C


Related Exams:
642-061 - Routing-and-Switching-Solutions-for-System-Engineers
642-432 - CCVP-Cisco-Voice-Over-IP
640-863 - Designing-for-Cisco-Internetwork-Solutions
642-055 - ARSFE-Advanced-Routing-and-Switching-for-Field-Engineers
646-229 - IP-Communications-Advanced-Account-Manager

Cisco 640-816 Search Help
Feel free to use search terms below while searching the Net for 640-816 exam:

Vendors Included

+ View All Vendors

Hot Exams

Latest update Exams

Copyright &copy 1998 - 2009 Exambible Ltd. All Rights Reserved.

Back to the top ↑
Exambible materials do not contain actual questions and answers from Microsoft's Certification Exams.