Check Point Check Point Certifications 156-215 Web Demo
This webdemo is just a demo data, only for reference and learning, there is no other purposes
1. Configure the gateway object with the host name and IP addresses for the remote site.
4. Click the Communication button in the gateway object's general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C
2. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C
3. Click the Communication button in the gateway object's general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C
4. Initialize SIC for the Gateway object on the SmartCenter Server.
3. Configure the gateway object with the host name and IP addresses for the remote site.
4. Click the Communication button in the gateway object's general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C
5. Which SmartConsole tool would you use to verify the installed Security Policy name?
Select the best response.
A. SmartUpdate
B. SmartView Monitor
C. Eventia Reporter
D. SmartView Status
Answer: B
6. The third shift Administrator was updating SmartCenter Access
settings in Global Properties. He managed to lock all of the
administrators out of their accounts. How can you unlock these accounts?
Select the best response.
A. Type fwm lock_admin ua from the command line of the SmartCenter Server.
B. Type fwm unlock_admin ua from the command line of the SmartCenter Server.
C. Type fwm unlock_admin ua from the command line of the Security Gateway.
D. Clear the "locked" box of the user's General Properties in SmartDashboard.
Answer: A
7. You installed SmartCenter Server on a computer running
SecurePlatform in the MegaCorp home office. You use IP address 10. You
also installed the Security Gateway on a second SecurePlatform
computer, which you plan to ship to another Administrator at a MegaCorp
hub office. What is the correct order for setting up SIC on the Gateway
before shipping it?
1. Run cpconfig on the Gateway, select "Secure Internal Communication", enter the activation key, and reconfirm.
2.Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C
3. Click the Communication button in the gateway object's general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C
4. Initialize SIC for the Gateway object on the SmartCenter Server.
3. Configure the gateway object with the host name and IP addresses for the remote site.
4. Click the Communication button in the gateway object's general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C
5. Which SmartConsole tool would you use to verify the installed Security Policy name?
Select the best response.
A. SmartUpdate
B. SmartView Monitor
C. Eventia Reporter
D. SmartView Status
Answer: B
6. The third shift Administrator was updating SmartCenter Access
settings in Global Properties. He managed to lock all of the
administrators out of their accounts. How can you unlock these accounts?
Select the best response.
A. Type fwm lock_admin ua from the command line of the SmartCenter Server.
B. Type fwm unlock_admin ua from the command line of the SmartCenter Server.
C. Type fwm unlock_admin ua from the command line of the Security Gateway.
D. Clear the "locked" box of the user's General Properties in SmartDashboard.
Answer: A
7. You installed SmartCenter Server on a computer running
SecurePlatform in the MegaCorp home office. You use IP address 10. You
also installed the Security Gateway on a second SecurePlatform
computer, which you plan to ship to another Administrator at a MegaCorp
hub office. What is the correct order for setting up SIC on the Gateway
before shipping it?
1. Run cpconfig on the Gateway, select "Secure Internal Communication", enter the activation key, and reconfirm.
2. Initialize SIC for the Gateway object on the SmartCenter Server.
3. Configure the gateway object with the host name and IP addresses for the remote site.
4. Click the Communication button in the gateway object's general screen, enter the activation key, and click Initialize and OK.
5. Install the Security Policy.
Select the best response.
A. 1, 3, 2, 4, 5
B. 2, 3, 1, 4, 5
C. 3, 4, 5
D. 1, 2, 4, 3
Answer: C
8. The third shift Administrator was updating SmartCenter Access
settings in Global Properties. He managed to lock himself out of his
account. How can you unlock this account?
Select the best response.
A. Type fwm lock_admin u from the command line of the SmartCenter Server.
B. Type fwm unlock_admin u from the command line of the Security Gateway.
C. Delete the file admin.lock in the $FWDIR/tmp/ directory of the SmartCenter Server.
D. Type fwm unlock_admin u from the command line of the SmartCenter Server.
Answer: A